SNMP Alerts

CONFIGURE > SNMP Alerts > System/Power/Networking

Tip: For more detailed information about configuring SNMP Alerts see the individual topic pages that follow.

On the CONFIGURE > SNMP Alerts page; SNMP Alert Managers can be added or deleted under SNMP > SNMP Alert Managers, for the following:

• System: Covers notification for the following causes.

  • Authentication: Notifies when a user attempts to log in via SSH, REST API, Web UI, or the device's serial ports. An alert is sent regardless of whether the log in has succeeded or failed.

  • Configuration: For changes that occur to the system configuration.

  • System Temperature: When temperature SNMP alerts are enabled, network operators are immediately notified should the system begin operating outside user-defined tolerances.

• Power: When voltage SNMP alerts are enabled, network operators are immediately notified should the PSU begin operating outside design tolerances. See "SNMP Alerts Power" on page 1 for further information.

• Networking (Cell Signal Strength): Be notified when cell signal strength leaves or re-enters the selected range, or when the network link state changes. A slider adjusts the upper and lower signal strength.

Tip: Manage the SNMP settings on the CONFIGURE > SNMP > SNMP Alert Managers page.